VS-100
12v 75amp
ALWAYS ON. NOT A DELAY TIMER.
click on image to enlarge
DIAGRAM
- FEATURES
- SPECIFICATIONS
- Built in diagnostic green LED indicator
- Engineered electronically for reverse polarity protection
- Potted compound construction. Sealed against vibration and moisture
- Installation: The VS-100 continues to draw 200 mA with the ignition off, which is equivalent to a 5 amp/hour lost per day. To insure battery durability, it is recommended that a switch be installed between the battery and this device. For installation, connect the master switch (battery) to the bolt (+) with wire, and connect the black wire (-) to the negative post.
Technical Specifications
Electrical Specifications
| Length | 4.25 in. |
| Width | 3 in. |
| Height | 1.375 in. |
| Mounting Hole Center | 5.250 x 2.250 |
| Weight | 15 oz. |
| Enclosure Material | Impact Resistant ABS thermoplastic |
Electrical Specifications
| Load Current Rate | 75 amps 12 VDC |
| Low Voltage Disconnect | 11 volts |
| Over Voltage Disconnect | 17 volts |
| Operating Temperature | -40 F to +185 F |
Caution: An appropriate size fuse circuit breaker must be used to ensure safety.