• Heavy Duty 200 amp encapsulated Delay Timer.
• Emergency override switch provides a convenient way to restore power to your equipment by holding the button in for 5-8 seconds.
• Protects communication equipment
• Low voltage detector (10.5 v)
• Over voltage protection (17 v)
• Automatic On/Off
• Very reliable & accurate
• Programmable with external DIP switch for selecting and adjusting time delay
• Built-in diagnostic red LED indicates timing functions active when flashing
• Built-in green LED for power idication
• Engineered electronically for reverse polarity protection
• Potted compound construction. Solid state, sealed against vibration and moisture.
• Delay time range: from 15 seconds to 8 hours. Tolerance plus (+) or minus (-) 10%

Technical Specifications

Length	4.25 in.
Width	3 in.
Height	3 in.
Mounting Hole Center	5.250 x 2.250
Weight	18 oz.
Enclosure Material	Impact Resistant ABS thermoplastic

Electrical Specifications

Load Current Rate	200 amps@73ºF 12 VDC
Max Inrush Current	300 amps for 3 sec @ 13.5 VDC
Operating Voltage	10 VDC min - 18 VDC max
Ignition Switch Trigger	10.4 - 15.0 VDC, 10mA
Low Voltage Disconnect	10.5
Over Voltage Disconnect	17 volts
Operating Temperature	-40 F to +185 F

Caution: An appropriate size fuse circuit breaker must be used to ensure safety.