• Emergency override switch provides a convenient way to restore power to your equipment by holding the button in.
• Programmable with external DIP switch for selecting and adjusting time delay
• Built-in diagnostic red LED indicates timing functions active when flashing
• Engineered electronically for reverse polarity protection
• Potted compound construction. Solid state, sealed against vibration and moisture.
• Delay time range: from 15 minutes to 8 hours. Tolerance plus (+) or minus (-) 10%
• Allow 3-5 seconds for delay on break at ignition switch connection for delay activation
• For installation, make a connection from the bolt (+) to the battery positive post with 4 gauge or thicker wire and the black wire (-) to the battery negative post. Connect the blue wire to fuse block (AM/FM radio) or cigarette lighter.

Technical Specifications

Length	4.25 in.
Width	3 in.
Height	1.375 in.
Mounting Hole Center	5.250 x 2.250
Weight	15 oz.
Enclosure Material	Impact Resistant ABS thermoplastic

Electrical Specifications

Load Current Rate	90 amps 12 VDC
Operating Voltage	10 VDC min - 18 VDC max
Ignition Switch Trigger	10.4 - 15.0 VDC, 10mA
Low Voltage Disconnect	10.5
Over Voltage Disconnect	17 volts
Operating Temperature	-40 F to +185 F
Stand-by Current	6 mA
Operating Current	300 mA

Caution: An appropriate size fuse circuit breaker must be used to ensure safety.