USB-1036
12v 30 amp
LAPTOP SHUTDOWN OPTION Programmable via USB for selecting and adjusting time delay.
click on image to enlarge
DIAGRAM
- FEATURES
- SPECIFICATIONS
- Programmable via USB for selecting and adjusting time delay
- Built-in diagnostic red Led indicates timing functions active when flashing; green LED indicated power on
- Emergency reset button provides a convenient way to restore power to your equipment by holding the button for 10 seconds
- Engineered electronically for reverse polarity protection
- Potted compound construction. Solid state, seal against vibration and moisture
- Easy external connection with .250 male tab mating with .250 female disconnect
- Delay time range: from 1 second to 8 hours. Tolerance plus (+) or minus (-) 10%
- Allow 3-5 seconds for delay on break at ignition switch connection for delay activation
- For installation, connect read wire (+) to the battery positive post, and black wire to battery (-) negative post. Connect the blue wire to the ignition switch to AM/FM radio or cigarette lighter.
Technical Specifications
Electrical Specifications
| Length | 4 in. |
| Width | 2 in. |
| Height | 1.5 in. |
| Mounting Hole Center | 3.5 in. with #6 screws |
| Weight | 6 oz. |
| Enclosure Material | Impact Resistant ABS thermoplastic |
Electrical Specifications
| Load Current Rate | 30 amps 12 VDC |
| Operating Voltage | 10 VDC min - 18 VDC max |
| Ignition Switch Trigger | 10.4 - 15.0 VDC, 10mA |
| Low Voltage Disconnect | 10.5 |
| Over Voltage Disconnect | 17 volts |
| Operating Temperature | -40 F to +185 F |
| Stand-by Current | 6 mA |
| Operating Current | 100 mA |
Download Software:
Please chose your software packege below.