FEATURES

• Built in diagnostic green LED indicator
• Engineered electronically for reverse polarity protection
• Potted compound construction. Sealed against vibration and moisture
• Installation: The VS-10 continues to draw 200 mA with the ignition off, which is equivalent to a 5 amp/hour lost per day. To insure battery durability, it is recommended that a switch be installed between the battery and this device. For installation, connect the red wire (+) to the battery positive post and the black wire (-) to the battery negative post.

SPECIFICATIONS

Technical Specifications

Length	4 in.
Width	2 in.
Height	1.5 in.
Mounting Hole Center	3.5in with #6 screws
Weight	6 oz.
Enclosure Material	Impact Resistant ABS thermoplastic

Electrical Specifications

Load Current Rate	30 amps 12 VDC
Low Voltage Disconnect	11 volts
Over Voltage Disconnect	17 volts
Operating Temperature	-40 F to +185 F

Caution: The VS-10 continues to draw 200 mA with the ignition off, which is equivalent to a 5 amp/hour lost per day. To insure battery durability, it is recommended that a switch be installed between the battery and this device.