FEATURES

• Built in diagnostic green LED indicator
• Engineered electronically for reverse polarity protection
• Potted compound construction. Sealed against vibration and moisture
• Installation: The VS-100 continues to draw 200 mA with the ignition off, which is equivalent to a 5 amp/hour lost per day. To insure battery durability, it is recommended that a switch be installed between the battery and this device. For installation, connect the master switch (battery) to the bolt (+) with wire, and connect the black wire (-) to the negative post.

SPECIFICATIONS

Technical Specifications

Length	4.25 in.
Width	3 in.
Height	1.375 in.
Mounting Hole Center	5.250 x 2.250
Weight	15 oz.
Enclosure Material	Impact Resistant ABS thermoplastic

Electrical Specifications

Load Current Rate	75 amps 12 VDC
Low Voltage Disconnect	11 volts
Over Voltage Disconnect	17 volts
Operating Temperature	-40 F to +185 F

Caution: The VS-10 continues to draw 200 mA with the ignition off, which is equivalent to a 5 amp/hour lost per day. To insure battery durability, it is recommended that a switch be installed between the battery and this device.